6030HD: Vertical Baler
Specifications
- 6" Dia. x 48" Cylinder with 4" rod
- 67,824 lbs. baling force
- 10 HP Motor
- 10 GPM - 1 Stage Pump
- 3 Phase 230/460 Volt
- Bale Size: 60"L x 30"W x 48"H
- Baler Weight 4,850 lbs
Included Equipment & Features
- Auto/cycle hold position controls
- AUTOMATIC load door opener
- NYLATRON wear pads, no metal on metal contact
- Easy tie channel system for fast, easy tying off bales
- SYSTEM INDICATOR LIGHT to assure ease of operation
- SOFT SHIFT design for added life of hydraulic components
- TIMED BALING sequence for dense consistent bales NO PRESSURE SWITCHES
- Key operated controls for authorized use only
- FEED GATE MECHANICAL LOCK to lower door for safe baling operation
- COMPUTER OPERATED, with indicator lights IE: indicate door open
- DWELL time against cardboard for dense consistent bales
- Front and rear retainer teeth to prevent build up
- Proximity (safety) sensors on both doors to assure safe operation, bottom door shut and feed gate
locked before auto cycle can be initiated.
Options
- Take a look at our 72" Vertical Baler
- 208 & 575 Volt three phase
- Single Phase
Download Specs
6030 Vertical Baler - Front View, Side View
6030 Vertical Baler - Top View
| Dimensional Data | ||
| A | OVERALL WIDTH | 80" |
| B | OVERALL DEPTH | 40" |
| C | OVERALL HEIGHT | 139" |
| D | FEED HEIGHT | 50" |
| E | BALE CHAMBER DEPTH | 30" |
| F | BALE CHAMBER HEIGHT | 44" |
| G | LOAD OPENING WIDTH | 60" |
| H | LOAD OPENING HEIGHT | 24" |
| I | BALE DOOR CLEARANCE | 61" |
| bALE sIZE dATA | |
| BALE WIDTH | 60" |
| BALE DEPTH | 60" |
| BALE HEIGHT | 42" |
| BALE TIES (HIGH TENSILE WIRE) 6-14 GA.* |
14" |
| BALE WEIGHT (OCC) 850 to 1,100 LBS. |
|